DAHLTRAM I-350CF THERMOPLASTIC 55 LB PELLET HIGHTEMP
Dahltram® I-350CF is a cost effective, high temperature use, additive manufacturing polymer with a maximum recommended usetemperature of 400°F (204°C). It is reinforced with carbon fiber for maximum strength and long term performance. Dahltram® I-350CF is idealfor high temperature tooling solutions and high temperature master molds. Additionally, it is vacuum tight, autoclave capable, and can bemachined to the tolerances and surface finish required.
per Each
Dahltram® I-350CF is a cost effective, high temperature use, additive manufacturing polymer with a maximum recommended use
temperature of 400°F (204°C). It is reinforced with carbon fiber for maximum strength and long term performance. Dahltram® I-350CF is ideal
for high temperature tooling solutions and high temperature master molds. Additionally, it is vacuum tight, autoclave capable, and can be
machined to the tolerances and surface finish required.
✔ Additive manufactured tools can go from conception to the production floor in days not weeks.
✔ Dahltram® I-350CF is a cost effective solution ideal for 350°F (176°C) cure systems and much more.
✔ Provides higher strength, higher temperature performance with lower creep.
✔ Carbon reinforcement offers greater stiffness versus glass and low warpage for predictable results.
✔ Better moisture absorption, better strength to weight, higher stiffness, and higher flexural strength than other high temperature additive manufacturing resins.
■ TECHNICAL DATA SHEET & SAFETY DATA SHEET
Technical Data Sheet | Display Name : | Dahltram I-350CF |
|---|---|
| Metric Description : | PART NUMBER FOR ESTORE ONLY |
| Base Unit of Measure : | Each |
| Width : | 0.00 Inches / 0.00 Meters |
| Length : | 0.00 Inches / 0.00 Meters |
| Net Weight : | 55.00 LBS / 25.00 KG |
| Gross Weght : | 57.00 LBS / 25.91 KG |
| Minimum Sell Quantity : | 1 LB |