TOOLFUSION-1B-1-GAL-HARDENER

TOOLFUSION-1B-1-GAL-HARDENER

TOOLFUSION-1A-5-GALLONS-RESIN

TOOLFUSION-1A-5-GALLONS-RESIN

TOOLFUSION-3A-5-GALLONS-RESIN

Toolfusion® 3A is a two part low viscosity epoxy infusion resin formulated to produce pre-preg quality, composite molds. Toolfusion® 3 has a low initial cure temperature of 120 ºF (49 ºC) and can be post cured to achieve a high glass transition temperature of 425 ºF (218 ºC). Void contents of less than 1% are achievable. Toolfusion® 3 will work in various RTM and VARTM processes including single and double bag arrangements to produce autoclave quality laminates.

Note: The USA Department of Transportation does not regulate shipping of this product.

$1,259.00 per 5 Gallons
In stock
SKU
TOOLFUSION3A5GL
TOOLFUSION-3A-5-GALLONS-RESIN is available to buy in increments of 1
DESCRIPTION

Toolfusion® 3A is a two part low viscosity epoxy infusion resin formulated to produce pre-preg quality, composite molds.
Toolfusion® 3 has a low initial cure temperature of 120 ºF (49 ºC) and can be post cured to achieve a high glass transition
temperature of 425 ºF (218 ºC). Void contents of less than 1% are achievable. Toolfusion® 3 will work in various RTM and
VARTM processes including single and double bag arrangements to produce autoclave quality laminates.

Note: The USA Department of Transportation does not regulate shipping of this product.

BENEFITS

✔ Resin infusion process delivers very high quality laminates with low manufacturing costs, no refrigeration costs, no autoclave running costs.

✔ Low initial cure temperature for low thermal expansion effect during curing and ability to use low cost master model materials.

✔ Nano technology delivers outstanding toughness & high Tg. (425 ºF or 218 ºC) for long tool life and reduced life cycle cost.

✔ Low viscosity allows infusion of thicker and more complex laminates with fewer resin feed lines.

✔ In comparison to metallic tools, Toolfusion® 3 composite tools are lighter weight for easier manual handing.

✔ In comparison to metallic tooling, Toolfusion® 3 composite tools have faster heat up and cool down rates for reduced production costs.

✔ Toolfusion® 3 composite tooling laminates have vacuum integrity for vacuum bag processing of parts in oven and autoclave.

TECHNICAL DATA SHEET & SAFETY DATA SHEET

Technical Data Sheet

Safety Data Sheet

WARNING: Cancer www.P65Warnings.ca.gov.

More Information
Display Name : Toolfusion® 3A
Metric Description : N/A
Base Unit of Measure : 5 Gallons
Width : 0.00 Inches / 0.00 Meters
Length : 0.00 Inches / 0.00 Meters
Net Weight : 45.00 LBS / 20.45 KG
Gross Weght : 51.00 LBS / 23.18 KG
Minimum Sell Quantity : 1 5G
Write Your Own Review
You're reviewing:TOOLFUSION-3A-5-GALLONS-RESIN